Back to Trace heating

Frost Protection Trace – metal & plastic pipes

FPT – plug & play, self-regulating heating tape with thermostat

  • Fabrication on the factory simplifies installation
  • Self-regulating heating band optimizes heating output
  • Can be used on plastic pipes
  • Automatic switching on under + 3°C
  • Automatic switch-off via + 9°C

Important Notes

  • The heating tape may be used in plastic pipes
  • Heating tape crossovers are allowed
  • Additional insulation of the pipe is absolutely necessary
  • We also manufacture non-standard FPT lengths
Category:

Description

ETHERMA Frost Protection Trace (FPT) protects pipes from ice and subsequent damage. FPT is a Plug & Play, self-regulating heating tape with an output of 17 W/m at + 5°C.

The thermostat is 100% protected against humidity and switches frost protection on when at risk below + 3°C and off again above + 9°C. Can be laid in plastic pipes.

Application

  • Frost protection of pipes
  • Frost protection of cells???????
  • Frost protection of plastic pipes

Specification

  • Voltage: 24 V
  • Output at 5°C: approx. 15 W/m
  • Min. installation temp.: – 15°C
  • Min. bending radius: 5 degrees
  • On- off switching temp.: + 3°C, + 9°C
  • Diameter: 7 mm
  • Protection rating: IP X7
  • Cold lead: 2 m; 2 x 1.0 mm²
  • Approval: CE Compliant

Download

PDF media to download etc