ETHERMA WST – living areas, bathrooms, spas

A strong dipole netted heating mat for use in walls

  • Voltage 42V and 230V
  • Only 3.3 mm thin
  • Prevention against damp walls
  • Pleasant infrared radiant heat

A bespoke version of the WST heating mat can be made to order depending on the size, voltage, output required.

Category:

Description

Net heating mat WST was especially developed as a wall heating system. It´s a factory-made, ready-to-use netted heating mat with Teflon inner and outer insulation and is used for heating rooms or sealing off the cold in wall. Due to the fact that it is only 3.3 mm thin it allows a low building height.

Because of the Dipole completion it can be easily installed in the plaster or tile-adhesive layer and much more. The netted heating mat WST has only one electrical connection line and two standard outputs, either 130 or 200 W/m².

nst_components

Application

On the one hand, the heating mats can be used as a fully-fledged heating system, on the other hand they can be used to dry damp walls and prevention of mold.

In the case of particularly cold exterior walls, they are used as a barrier to hold back the cold from cooling the internal wall surface.

Netted heating mat WST with 130 W/m², 230 V
For drying of damp walls, prevention of mildew and as a barrier against cold walls.

Netted heating mat WST with 200 W/m², 230 V
For heating of living spaces with pleasant infrared radiant heat and as a barrier against particularly cold walls.

Heating mat WST with 250 W/m², 42 V
For heating shower stalls and shower benches.

Specification

  • Voltage: 42 V, 230 V
  • Output: 130, 200 W/m²
  • Special output: on request
  • Temperature-resistant: up to 150 °C
  • Heating line thickness: max. 3.3 mm
  • Protection rating: IP X7
  • Cold lead: 4 m; 2 x 1,0 mm²/1.5 mm² + earth shield
  • Approval: CE compliant

Controls & Accessories

KALT-TCT-1

PTC-thermistor for netted heating mat DS, 2-pole with earth braiding 1.0 mm², per meter

MTS

Installation set, comprising FSH-12 and 2.5 m installation pipe SS-12

MSTD

Repair set for heating conductor of netted heating mat NST

GHK-250-230/42

Transformer encapsulated in a plastic housing, output: 250 VA, voltage: 230 V / 42 V

GHK-400-230/42

Transformer encapsulated in a plastic housing, output: 400 VA, voltage: 230 V / 42 V

GHK-500-230/42

Transformer encapsulated in a plastic housing, output: 500 VA, voltage: 230 V / 42 V

Switch mounted thermostat with white touchpad, 16 A. 5-60°C, 2 frames in white included

Switch mounted thermostat with black touchpad, 16 A, 5-40°C, 2 frames in white and black included

Switch mounted thermostat with white touchpad, 16 A. 5-40°C, 2 frames in white and black included

 

 

Download

ETHERMA_WST