Description
Laminotherm heating mats are used for tempering the floor and heating rooms, equipped with parquet and laminate floors. This heating system is installed in a floating way.
The reinforced aluminium fabric guarantees an optimal heat distribution and prevents the formation of “Hot Spots”. The emission of electric smog is very low and due to the dipole completion and the setting of only 1.3 mm, this heating mat can be installed very easily.
Application
Used for tempering the floor and heating rooms equipped with parquet (max. thickness 15 mm) and laminate (max. thickness 9 mm) and cork floors (max. thickness 10 mm). Only to be used in dry rooms.
Not suitable for carpet, PVC or tiles; please use the DS heating mats domestic or NST heating mats for commercial applications.
Note: Avoid positioning thermostats beneath cupboards, beds, cabinets, etc. where heat build-up may occur and distort the temperature.
Specification
Laminotherm Specification
- Voltage: 230 V
- Output: 120 W/m²
- Temperature-resistant: to 90°C
- Thickness of the heating mat: 1.3 mm
- Insulation: Fluoropolymer PFA
- Protection rating: IP X7
- Cold lead: 5m; 2x 1.0 mm² + earth shield
- Approval: NEMCO
eTOUCH mini Specification
- Voltage: 230V
- Switching current: 16A
- Temp. range: 5 – 40ºC
- Mounting: on flush-mounted switching box
- Hysteresis: Adjustable +/- 0.2 to 2.0 °C
- Power reserve: 24 hours
- Display colour: White or black
- Frame colour: Gloss signal white RAL 9003 Gloss graphite black RAL 9011
- Dimensions: 55 x 55 mm (without frame)
- Floor sensor: 3 m (max. 50 m)
- Protection rating: IP 21
- Approval: FIMKO
Selection Guide
LM-120 W/m² – As main heating in kitchens, bathrooms, foyers or winter gardens
with standard insulation.
Suitable also to temper the floor in poorly insulated areas or to boost the temperature on demand.