ETHERMA Laminotherm Set LMSS

Laminotherm Set LMSS – with electronic switch mounted thermostat ET-71

  • 1 Laminotherm 122-LM, 120 W/m²
  • 1 switch mounted thermostat ET-71
  • 1 sensor protective tube FSH-12 incl. 2.5m installation pipe SS-12
Category:

Description

Laminotherm heating mats are used for tempering the floor and heating rooms, equipped with parquet and laminate floors. This heating system is installed in a floating way.

The reinforced aluminium fabric guarantees an optimal heat distribution and prevents the formation of “Hot Spots”. The emission of electric smog is very low and due to the dipole completion and the setting of only 1.3 mm, this heating mat can be installed very easily.

Application

Used for tempering the floor and heating rooms equipped with parquet (max. thickness 15 mm)  and laminate (max. thickness 9 mm) and cork floors (max. thickness 10 mm). Only to be used in dry rooms.

Not suitable for carpet, PVC or tiles; please use the DS heating mats domestic or NST heating mats for commercial applications.

Note: Avoid positioning thermostats beneath cupboards, beds, cabinets, etc. where heat build-up may occur and distort the temperature.

Specification

Laminotherm Specification

  • Voltage: 230V
  • Output: 120 W/m²
  • Temperature-resistant: to 90°C
  • Thickness of the heating mat: 1.3 mm
  • Insulation: Fluoropolymer PFA
  • Protection rating: IP X7
  • Cold lead: 5m; 2x 1.0 mm² + earth shield
  • Approval: NEMCO

Electronic Switch Mounted Thermostat ET-71 Specification

  • Voltage: 230V
  • Switching current: 16A
  • Mounting: on flush-mounted switching box
  • Temp. range: 10-45ºC
  • Colour: White, similar to RAL 9016
  • Dimensions: 55 x 55 mm
  • Protection rating: IP 21
  • Floor sensor: 3m
  • Approval: CE compliant

Selection Guide

LM-120 W/m² – As main heating in kitchens, bathrooms, foyers or winter gardens
with standard insulation.

Suitable also to temper the floor in poorly insulated areas or to boost the temperature on demand.

Example Installation

Controls & Accessories

WAK

Adhesive tape made of aluminium, 50 m roll, broad: 50 mm

Laminoflies-10

Aluminium coated impact sound insulation for optimal distribution of heat, 10m²/roll, thickness: 3 mm

 

Download

ETHERMA_Laminotherm