ETHERMA DS – Bathrooms & living areas

The thin heating mat for maximum flexibility:

Thickness – 2.7 mm
Also suitable for wall heating
Self-adhesive netted heating mat
Single connection line
Very low magnetic field < 25 nT
Flat, torsion-free laying thanks to stitching technology
3 standard widths: 30, 50, 100 cm
Custom-made special orders and sizes

Description

The netted heating mat DS is a factory-made ready-to-use netted heating mat to temper the floor temperature, for heating rooms or sealing off the cold in walls. Due to the fact that it is only 2.7 mm thin it allows a low building height.

This netted heating mat DS is self-adhesive and because of the Dipole completion it can be easily installed in tile-adhesive layer.

The stitching technology guarantees a 100 % safe and easy installation as well as a high stability of the heating mat. The netted heating mat DS is available in three standard outputs either 130. 160 or 200 W/m².

Application

Floor heating under tiles, stone and marble with particularly low construction height. Also suitable for installation under carpet tiles and carpets.

Specification

Voltage: 230 V
Output: 130, 160, 200 W/m2
Temperature-resistant: to 90 °C
Thickness of heating conductor: 2.7 mm
Standard widths: 30, 50, 100 cm
Mash: 12×12 mm, self-adhesive
Protection rating: IP X7
Cold lead: 4 m; 2 x 1.0 mm² + earth shield
Approval: VDE

Selection Guide

DS-130 W/m² – Floor temperature control or central heating system in low energy housing.
DS-160 W/m² – As full heating system in kitchen, bathrooms and foyers with standard insulation.
DS-200 W/m² – Room heating in rooms without or with poor insulation; bathroom, sauna, wellness areas, winter gardens and wherever a short amount of time for heating is necessary.