Call 0800 210 0288
E-mail: sales@arc-ers.co.uk
Contact
Laminotherm heating mats are used for tempering the floor and heating rooms, equipped with parquet and laminate floors. This heating system is installed in a floating way.
The reinforced aluminium fabric guarantees an optimal heat distribution and prevents the formation of “Hot Spots”. The emission of electric smog is very low and due to the dipole completion and the setting of only 1.3 mm, this heating mat can be installed very easily.
Used for tempering the floor and heating rooms equipped with parquet (max. thickness 15 mm) and laminate (max. thickness 9 mm) and cork floors (max. thickness 10 mm). Only to be used in dry rooms.
Not suitable for carpet, PVC or tiles; please use the DS heating mats domestic or NST heating mats for commercial applications.
Note: Avoid positioning thermostats beneath cupboards, beds, cabinets, etc. where heat build-up may occur and distort the temperature.
LM-120 W/m² – As main heating in kitchens, bathrooms, foyers or winter gardens
with standard insulation.
Suitable also to temper the floor in poorly insulated areas or to boost the temperature on demand.
WAK
Adhesive tape made of aluminium, 50 m roll, broad: 50 mm
KRU
Capillary thermostat, switched current 16 A, 10 – 60°C, sensor wire 1.5 m
Laminoflies-10
Aluminium coated impact sound insulation for optimal distribution of heat, 10m²/roll, thickness: 3 mm
Switch mounted thermostat, 10-45 °C, 16 A, colour: white; remote sensor included
Switch mounted thermostat with black touchpad, 16 A, 5-40°C, 2 frames in white and black included
Switch mounted thermostat with white touchpad, 16 A. 5-40°C, 2 frames in white and black included
Switch mounted thermostat with white touchpad, 16 A. 5-60°C, 2 frames in white included
